1. Bicom Systems
  2. Solution home
  3. SERVERware
  4. HOWTOs

SERVERware 3 System Disk Replacement

SERVERware 3 System Disk Replacement

When the system disk is damaged, the next procedure should be followed:

First, we need to replace the physical disk in the server.

Then we should reboot the system and boot from the SERVERware 3 installation media.

Follow installation procedure.

sw3 system disk Replacement 01.png

Step 1.

On the first screen press next.

sw3 system disk Replacement 02.png

Step 2.

On the second screen, choose the type of installation that was previously installed on the processing host or storage controller and press next.

sw3 system disk Replacement 03.png

Step 3.

At this step system installation will search the storage disk and if a previous installation is found, you will get this message:

Previous storage detected

We will select yes in this step to continue restoring the system.

sw3 system disk Replacement 04.png

Step 4.

In the next step, select the disk on which we will restore the system.

sw3 system disk Replacement 05.png

Step 5.

The system will ask you to confirm system setup. Press next to continue.

sw3 system disk Replacement 06.png

Step 6.

On the last step, we will press finish. After server reboot, we will have our system fully restored and functional.

sw3 system disk Replacement 07.png