1. Bicom Systems
  2. Solution home
  3. SERVERware
  4. HOWTOs

SERVERware 3 Creation of USB installation media

SERVERware 3 Creation of USB installation media

Creating bootable USB on Windows

Download Win32DiskImager from

http://sourceforge.net/projects/win32diskimager

Install the program and run it (which is straightforward in Windows).

With this guide, you should be able to use Win32DiskImager to make a SERVERware 3 USB
boot drive in Windows XP, Windows 7, Windows 8, and Windows 10.

The following screenshots were made on MS Windows 7.

Download SERVERware3 USB installation .img

https://www.bicomsystems.com/download

From the drop-down list select SERVERware 3 and download the latest version of SERVERware 3 USB image.

Start and overview

You will need 2 GB (or greater) USB drive.

Any data on the drive will be lost and you don't need to format the drive as the process of flashing the .img file will overwrite the drive.

Run Win32DiskImager

Select the image file from your drive

Select the .img file that you want to use in the Win32 Disk Imager window. Click on the symbol, and get the file selector (in the right bottom corner). The default setting will show image (IMG) files. Leave it as is and select the image file we have just download "serverware-3.0.img" and click OPEN.

In the upper right corner select the destination, letter of your USB storage, and click the button "Write".

A pop-up window will appear asking you to confirm overwrite of the USB drive, click "YES" and wait for the process to finish.

When bootable media is created you will get a message "write successful". Once you click OK you have successfully created the USB Installation media for SERVERware 3.

Creating bootable USB on linux / MacOS


1.) Download SERVERware3 installation .iso from bicomsystems.com

https://www.bicomsystems.com/download#serverware

From the drop-down list select SERVERware 3 and download the latest version of SERVERware 3 iso image.

2.) download BalenaEtcher Bootable media creator (free) and install it on your system.

https://www.balena.io/etcher/

3.) Insert USB media in USB port on your pc.

4.) Open BalenaEtcher


Select the image we have just downloaded.


Make sure the target for the image is your USB media and press flash.


After eta 2-5 minutes, your USB bootable image will be created and ready for use.


Now you can use it to install SERVERware 3.






Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select atleast one of the reasons

Feedback sent

We appreciate your effort and will try to fix the article