TABLE OF CONTENTS
If you want to include some additional UAD configuration for your phone, add desired parameters to User Agent General Auto Provisioning Template filed in Settings -> UAD -> () menu, or add them directly to the extension in UAD Auto Provisioning Template section.
In the next sections you can see examples of additional UAD configuration for setting up static IP address for different UADs.
Yealink
If you want to change the IP address of your Yealink phone using additional UAD configuration you should add these fields in Settings -> UAD -> Yealink menu, or add them directly to the extension in UAD Auto Provisioning Template section:
Example: IP address: 192.168.1.10; Subnet mask: 255.255.255.0; Default gateway: 192.168.1.1; Primary DNS: 8.8.8.8
network.internet_port.type = 2 network.internet_port.ip = 192.168.1.10 network.internet_port.mask = 255.255.255.0 network.internet_port.gateway = 192.168.1.1 network.static_dns_enable = 1 network.primary_dns = 8.8.8.8
- Make sure that you change the IP address, subnet mask, default gateway and primary DNS from the example with your desired values.
If you have done everything as described above, additional parameters will be sent to the phone with default configuration.
For the complete list of all parameters please visit official Yealink support page.
Polycom
If you want to change the IP address of your Polycom phone using additional UAD configuration you should add these fields in Settings -> UAD -> Polycom menu, or add them directly to the extension in UAD Auto Provisioning Template section :
Example: IP address: 192.168.1.10; Subnet mask: 255.255.255.0; Default gateway: 192.168.1.1; Primary DNS: 8.8.8.8
<polycomConfig>
<device device.set="1"
device.dhcp.enabled.set="1"
device.dhcp.enabled="0"
device.net.enabled.set="1"
device.net.enabled="1"
device.net.ipAddress.set="1"
device.net.ipAddress="192.168.1.10"
device.net.subnetMask.set="1"
device.net.subnetMask="255.255.255.0"
device.net.IPgateway.set="1"
device.net.IPgateway="192.168.1.1"
device.dns.serverAddress="8.8.8.8" />
</polycomConfig>- Make sure that you change the IP address, subnet mask, default gateway and primary DNS from the example with your desired values.
Note: All the parameters for the Polycom phone's additional configuration must be put between these two tags:
<polycomConfig> </polycomConfig>
If you have done everything as described above, additional parameteres will be sent to the phone with default configuration.
For the complete list of all parameters please visit official Polycom support page.
Htek
If you want to change the IP address of your Htek phone using additional UAD configuration you should add these fields in Settings -> UAD -> Htek menu, or add them directly to the extension in UAD Auto Provisioning Template section :
Example: IP address: 192.168.1.10; Subnet mask: 255.255.255.0; Default gateway: 192.168.1.1; Primary DNS: 8.8.8.8
P8=1 P9=192 P10=168 P11=1 P12=10 P13=255 P14=255 P15=255 P16=0 P17=192 P18=168 P19=1 P20=1 P21=8 P22=8 P23=8 P24=8
- Make sure that you change the IP address, subnet mask, default gateway and primary DNS from the example with your desired values.
If you have done everything as described above, additional parameters will be sent to the phone with default configuration.
For the complete list of all parameters please visit official Htek support page.
Grandstream
If you want to change the IP address of your Grandstream phone using additional UAD configuration you should add these fields in Settings -> UAD -> Grandstream menu, or add them directly to the extension in UAD Auto Provisioning Template section :
Example: IP address: 192.168.1.10; Subnet mask: 255.255.255.0; Default gateway: 192.168.1.1; Primary DNS: 8.8.8.8
P8=1 P9=192 P10=168 P11=1 P12=10 P13=255 P14=255 P15=255 P16=0 P17=192 P18=168 P19=1 P20=1 P21=8 P22=8 P23=8 P24=8
- Make sure that you change the IP address, subnet mask, default gateway and primary DNS from the example with your desired values.
If you have done everything as described above, additional parameters will be sent to the phone with default configuration.
For the complete list of all parameters please visit official Grandstream support page.
Cisco
If you want to change the IP address of your Cisco phone using additional UAD configuration you should add these fields in Settings -> UAD -> Cisco menu, or add them directly to the extension in UAD Auto Provisioning Template section :
Example: IP address: 192.168.1.10; Subnet mask: 255.255.255.0; Default gateway: 192.168.1.1; Primary DNS: 8.8.8.8
<flat-profile> <Connection_Type ua="na">Static IP</Connection_Type> <Static_IP ua="na">192.168.1.10</Static_IP> <NetMask ua="na">255.255.255.0</NetMask> <Gateway ua="na">192.168.1.1</Gateway> <Primary_DNS ua="na">8.8.8.8</Primary_DNS> </flat-profile>
- Make sure that you change the IP address, subnet mask, default gateway and primary DNS from the example with your desired values.
Note: All the parameters for the Cisco phone additional configuration must be put between these two tags:
<flat-profile> </flat-profile>
If you have done everything as described above, additional parameteres will be sent to the phone with default configuration.
For the complete list of all parameters please visit official Cisco support page.
Fanvil
If you want to change the IP address of your Fanvil phone using additional UAD configuration you should add these fields in Settings -> UAD -> Fanvil menu, or add them directly to the extension in UAD Auto Provisioning Template section :
Example: IP address: 192.168.1.10; Subnet mask: 255.255.255.0; Default gateway: 192.168.1.1; Primary DNS: 8.8.8.8
<GLOBAL CONFIG MODULE> WAN Mode :STATIC WAN IP :192.168.1.10 WAN Subnet Mask :255.255.255.0 WAN Gateway :192.168.1.1 Primary DNS :8.8.8.8 Enable DHCP :0
- Make sure that you change the IP address, subnet mask, default gateway and primary DNS from the example with your desired values.
If you have done everything as described above, additional parameteres will be sent to the phone with default configuration.
For the complete list of all parameters please visit official Fanvil support page.
VTech
If you want to change the IP address of your VTech phone using additional UAD configuration you should add these fields in Settings -> UAD -> VTech menu, or add them directly to the extension in UAD Auto Provisioning Template section :
Example: IP address: 192.168.1.10; Subnet mask: 255.255.255.0; Default gateway: 192.168.1.1; Primary DNS: 8.8.8.8
dhcp$:off ip_adr$:192.168.1.10 netmask$:255.255.255.0 gateway$:192.168.1.1 dns_server1$:8.8.8.8
- Make sure that you change the IP address, subnet mask, default gateway and primary DNS from the example with your desired values.
If you have done everything as described above, additional parameteres will be sent to the phone with default configuration.
For the complete list of all parameters please visit official VTech support page.
Snom
If you want to change the IP address of your Snom phone using additional UAD configuration you should add these fields in Settings -> UAD -> Snom menu, or add them directly to the extension in UAD Auto Provisioning Template section :
Example: IP address: 192.168.1.10; Subnet mask: 255.255.255.0; Default gateway: 192.168.1.1; Primary DNS: 8.8.8.8
dhcp$:off ip_adr$:192.168.1.10 netmask$:255.255.255.0 gateway$:192.168.1.1 dns_server1$:8.8.8.8
- Make sure that you change the IP address, subnet mask, default gateway and primary DNS from the example with your desired values.
If you have done everything as described above, additional parameteres will be sent to the phone with default configuration.
For the complete list of all parameters please visit official Snom support page.
Obihai
If you want to change the IP address of your Obihai phone using additional UAD configuration you should add these fields in Settings -> UAD -> Obihai menu, or add them directly to the extension in UAD Auto Provisioning Template section :
Example: IP address: 192.168.1.10; Subnet mask: 255.255.255.0; Default gateway: 192.168.1.1; Primary DNS: 8.8.8.8
<ParameterList>
<Object>
<Name>DeviceInfo.WAN.</Name>
<ParameterValueStruct>
<Name>AddressingType</Name>
<Value>Static</Value>
</ParameterValueStruct>
<ParameterValueStruct>
<Name>IPAddress</Name>
<Value>192.168.1.10</Value>
</ParameterValueStruct>
<ParameterValueStruct>
<Name>SubnetMask</Name>
<Value>255.255.255.0</Value>
</ParameterValueStruct>
<ParameterValueStruct>
<Name>DefaultGateway</Name>
<Value>192.168.1.1</Value>
</ParameterValueStruct>
<ParameterValueStruct>
<Name>DNSServer1</Name>
<Value>8.8.8.8</Value>
</ParameterValueStruct>
</Object>
</ParameterList>- Make sure that you change the IP address, subnet mask, default gateway and primary DNS from the example with your desired values.
If you have done everything as described above, additional parameters will be sent to the phone with default configuration.
For the complete list of all parameters please visit official Obihai support page.
Mitel
If you want to change the IP address of your Mitel phone using additional UAD configuration you should add these fields in Settings -> UAD -> mitel menu, or add them directly to the extension in UAD Auto Provisioning Template section :
Example: IP address: 192.168.1.10; Subnet mask: 255.255.255.0; Default gateway: 192.168.1.1; Primary DNS: 8.8.8.8
dhcp:0 ip:192.168.1.10 subnet mask:255.255.255.0 default gateway:192.168.1.1 dns1:8.8.8.8
- Make sure that you change the IP address, subnet mask, default gateway and primary DNS from the example with your desired values.
If you have done everything as described above, additional parameters will be sent to the phone with default configuration.
For the complete list of all parameters please visit official Mitel support page.
Gigaset
If you want to change the IP address of your Gigaset phone using additional UAD configuration you should add these fields in Settings -> UAD -> Gigaset menu, or add them directly to the extension in UAD Auto Provisioning Template section :
Example: IP address: 192.168.1.10; Subnet mask: 255.255.255.0; Default gateway: 192.168.1.1; Primary DNS: 8.8.8.8
<settings> <param name="NET.LAN.IP.DHCP.Enabled" value="0"/> <param name="NET.IP.IPv4.Address" value="192.168.1.10"/> <param name="NET.IP.IPv4.SubnetMask" value="255.255.255.0"/> <param name="NET.IP.IPv4.StandardGateway" value="192.168.1.1"/> <param name="NET.IP.IPv4.PreferredDNSServer" value="8.8.8.8"/> </settings>
- Make sure that you change the IP address, subnet mask, default gateway and primary DNS from the example with your desired values.
If you have done everything as described above, additional parameters will be sent to the phone with default configuration.
For the complete list of all parameters please visit official Gigaset support page.